- Guaranteed Class 100 dry heat Sterilization .
- Total cycle time only 4 Hrs.
- Belt Driven Motor for main Blower. This eliminates the frequent problem of Motor getting heated up and frequent replacement of motor bearings.
- Heater Terminals fully copper strip wired to eliminate any particle generation by burning of wires.
- Unique Pressurized locking system for 100% leak proof doors.
- Fully Automatic control panel with memory circuit.
- PLC of Mitsubishi /Allen Bradley make.
- Additional safety Digital Temp Controller as back up for overheating.
- Thyrosterised cum contactor back up control for Heaters.
- Total concealed wiring.
- Eight probes for temperatures at different points with provision to insert additional probes for validation.
- Continuous Generation of Documents for validation for every batch.
- Memory circuits in case of power failure.
- New features as critical temperature & stabilization band to ensure uniform circulation and proper sterilization of every batch.
- Four Different memory options in the PLC for four different programs.
- User name, Code No, Date, Real time ,Set parameters etc. available in each and every batch printed
- Rapid cooling system for faster cooling.
- User friendly functions with pass word locking to avoid any misuse.
- AVAILABLE CAPACITIES : 50 ltrs. to 5,000 ltrs.
Dry Heat Sterilizer
Dry Heat Sterilizer
About Dry Heat Sterilizer machine
Check out the function of dry heat sterilizer
Dry Heat Sterilizer are mainly used for sterilizing and dehydrogenating glass and metal ware including ampoules, injection bottles, infusion bottles and production equipment. This stainless steel dry heat sterilizer use dry heat and are better than the steam sterilizers in the sense that the process does not corrode the machine. The pharma equipment can also be used to sterilize liquids with low moisture content and also for treatment of medicated powders. The process completely destructs all micro-organisms and does not cause any environmental pollution or inconvenience to humans.
Constructed with stainless steel S.S. 316 L quantity, the dry heat sterilizer confirms to the GMP standards & temperature uniformity in the entire chamber is guaranteed. The Different cycles of DHS includes Exhaust cycle, pre-sterilization, sterilization, stabilization, cooling, cycles. All these cycles are controlled automatically by PLC operated fully automatic control panel. Graph cum printout is also provided for temp recording & validation at 8 – 16 points.
| Model | DHS – 0.22 | DHS – 0.64 | DHS – 1.2 | DHS – 1.8 |
|---|---|---|---|---|
| Capacity | 225 Liters | 640 Liters | 1200 Liters | 1800 Liters |
| Temperature range | Room temperature to 300°C | Room temperature to 300°C | Room temperature to 300°C | Room temperature to 300°C |
| Clean Level | Class 100 | Class 100 | Class 100 | Class 100 |
| Heating Power | 9 KW | 15 KW | 22 KW | 28 KW |
| Circulating fan power | 0.75 KW | 2.2 KW | 3.0 KW | 4.0 KW |
| Supplementary fan power | 0.18 KW | 0.18 KW | 0.25 KW | 0.25 KW |
| Moisture fan power | 0.18 KW | 0.25 KW | 0.37 KW | 0.75 KW |
| Circulation fan flow | 3500 m3/h | 4600 m3/h | 5500 m3/h | 6300 m3/h |
| Supplementary fan flow | 300 m3/h | 300 m3/h | 408 m3/h | 408 m3/h |
| Operating Chamber (W × D × H) mm |
600 × 500 × 750 | 800 × 800 × 1000 | 1000 × 1000 × 1200 | 1000 × 1200 × 1500 |
| Outer Cabinet (W × D × H) mm |
1650 × 900 × 1750 | 1850 × 1200 × 1950 | 2050 × 1400 × 2150 | 2050 × 1600 × 2450 |
| Control system | HMI based fully automatic functions | |||
| Printer | Thermal printer | |||
| Cooling | Water cooling system | |||
| Construction | 304 Stainless steel (316 optional) | |||
| Doors | Leak proof doors w/ pressurized locking system | |||
| Air Supply | Pressure module with pre filter and HEPA filter to ensure fresh filtered air entry | |||
| Optional | – Strip chart recorder – Provision to attach laser jet printer – Trolley – Trays – Wire baskets – Additional temperature probes |
|||
| Note: | Dimensions of Class 100 and Class 1000 dry heat sterilizers are same | |||